The thermostat is designed for control of electric heating devices (Built in sensors for measuring room temperature and external sensor for high temperature protection,to prevent heating device burned due to high temperature).
In the state of shutdown, the thermostat will turn on the heating device automatically When the room temperature is below 5℃. when the room temperature is above 7℃, the thermostat will turn off the heating device automatically.
1.Temperature sensor : NTC
2.Temperature accuracy : ±1℃
3.Power consumption : <1W
4.Voltage: AC230V 60Hz
5.Load current : 3A/16A
6.Temperature setting : 5~60℃
7.Key : Touch key
Thermostat network steps
1.Press the up and down keys for 10 seconds at the same time when the thermostat is turned off. When the buzzer is heard 3 times, the thermostat is already in the network initialization state.
2.Press the power key to turn on the thermostat, and the WiFi module of the thermostat will automatically enter into the networking mode. At this time, make sure that the router or the corresponding WiFi device is open. It is recommended to place it within 5 meters away from the thermostat. When the thermostat displays the WiFi mark, it indicates the successful connection.
Mobile phone network steps
1.Open the WiFi of the mobile phone and download the "Wisen" APP by scanning the two-dimensional code below, and install it on the phone.
2.Open the downloaded "Wisen" APP.
3.Click "+" in the upper right corner to add the device, then click "open WiFi, connect the device" .
4.Input the WiFi account and password, then click "conﬁrm"
5.The mobile phone enter to the mode of searching and connecting device.
6.When the mobile phone connection device is successful, it will enter the
main interface of the "Wisen".
7.Click the device that below "device status", and then enter to the control interface.
Exit the network description
1.thermostat: Press the up and down keys for 10 seconds at the same time when the thermostat is turned off. When the buzzer is heard 3 times, the thermostat is already in the network initialization state.
1）Click "Wisen" APP to enter the main interface then clicks the icon “ M ”on the upper left corner.
2)Click on device management to select the device to turn off the network, then click on the bottom to delete the device, which indicates that the exit network is successful.
Device sharing description:
1. click the device management to select the devices to be shared, then click the shared license will appear a two-dimensional code, sweep the two-dimensional code to share the device.